Hamon
This style is the classic Japanese form of rain chain. Although it is a simple rain chain with rings connected to each other, it is a popular product in Japan. Rainwater can be seen flowing through the ring, and each drop trickles down beautifully. This rain chain is designed for locations with limited rainfall, as it is difficult to transport a large amount of rain. It is can be used in various types of architecture, both Japanese and Western styles. Even on days when it does not rain, the beauty of the rings embellish the building.
Precautions for use
Hamon-type rain chain with a series of rings produce more water splashes than cup-type rain chains. Therefore, when installing Hamon type rain chains, please consider installing them in areas without traffic of people and where some splashing can be tolerated, or where the amount of rainwater is minimal. For locations where there is a relatively large amount of water flow or where the traffic of people is near, we recommend using rain chain chains other than the Hamon type.
MaxDrainage: Liter/hour. 720
Ring width (inch)1 7/8"
Attachments for upper part
Toh / Ta-ke / Toh L / Tama L(L size rain chains will include Large size of Gutter outlet and Large size of Bracket.)
Hamon / Migumo / Ajiro
Installing rain chain on a square gutter
Step1
Φ45mm hole (Φ60mm hole for L size rain chain) in a gutter for an outlet.
Step2
Pop in a gutter outlet and apply caulking as needed to seal a joint for leakage prevention.
Step3
Hook a stainless steel wire to the top of a rain chain and pull up a wire through an outlet.
Step4
Fasten a stainless steel wire onto a bracket and fix it in place so that it is positioned at the center of a hole. Cut off excessive wire.
Installing rain chain on a round gutter
Step1
Cut about Φ25mm hole (Φ40mm for L size) in a round gutter. Fold the clipped edges down vertically.
Step2
Set a bracket in the middle of a hole from STEP 1.
Step3
Pass a stainless steel wire through the top of a rain chain and pull up a wire through a gutter hole.
Step4
Fasten a stainless steel wire onto a bracket and fix it in place so that it is positioned at the center of a hole. Cut off excessive wire.
Support
About Delivery of Products
After we receive your order, we will complete the product in 2 weeks and ship out from SEO Inc. located in Japan. The products will be air shipped and will be delivered to you in about 1 ~ 2 weeks for destinations in the USA, Canada, Australia or Taiwan. For other countries, the shipment will arrive in about two weeks as well. However, since the transaction is an export, the arrival may be delayed due to customs.
Customs Duty and Tariff
Customs duty is not included in our pricing. Upon purchasing our products, the customer is responsible for any customs duty in accordance to the laws of respective countries.
Return and ExchangePolicies
・In principle, we do not accept returns or exchanges after the arrival of the product. However, if the request for return or exchange of the product is due to defects, therefore our responsibility, then please contact us via the contact form within one week of the arrival. Please note that we cannot accept returns or exchanges passed that one-week period.
・In general, after receiving the returned product, we will refund the amount within one month after inspection.
・If the product is defective due to an accident during transportation, please contact us within one week of arrival. After you return the product, we will send you a replacement.
・As a general rule, the customer is responsible for the shipping costs when returning the product.
・Customers are responsible for contacting customs when processing the refund of import taxes paid upon receipt of the product.
・ If you have any questions about any of the information above, please contact us through the contact form.
Measuring Method
Please measure the height from the bottom of the eaves sprout to the setup surface on the ground.
