Rain chain installation guide: hamon, migumo & ajiro

Installing rain chain on a square gutter

Φ45mm hole (Φ60mm hole for L size rain chain) in a gutter for an outlet.

Pop in a gutter outlet and apply caulking as needed to seal a joint for leakage prevention.

Hook a stainless steel wire to the top of a rain chain and pull up a wire through an outlet.

Fasten a stainless steel wire onto a bracket and fix it in place so that it is positioned at the center of a hole. Cut off excessive wire.

Cut about Φ25mm hole (Φ40mm for L size) in a round gutter. Fold the clipped edges down vertically.

Set a bracket in the middle of a hole from STEP 1.

Pass a stainless steel wire through the top of a rain chain and pull up a wire through a gutter hole.

Fasten a stainless steel wire onto a bracket and fix it in place so that it is positioned at the center of a hole. Cut off excessive wire.