Attaching the anchor (applicable to every type of rain chain)
Step1
Pass the U-shaped metal fitting through the bottom loop of the rain chain (or the bottom of the gutter body in the case of Hamon).
![](https://cdn.shopify.com/s/files/1/0678/1009/9507/files/attach_anchorbolt_ce1d5e50-7d4e-488c-9066-f627263e3d17_600x600.jpg?v=1672035319)
Step2
Thread the supplied wire through the rain chain. Next, thread the circular sleeve onto the wire. (Optional wire for anchor can be purchased with a rain chain)
![](https://cdn.shopify.com/s/files/1/0678/1009/9507/files/attach_anchorbolt_3-1024x633_0367f1bc-bbba-482c-a69b-6ba961ba056e_600x600.jpg?v=1672035328)
Step3
① Pass the wire through the anchor, and then ②pass the wire through the circular sleeve. Then, tighten the hexagon socket set screw into the circular sleeve with an Allen wrench. Cut off the excess wire.
![](https://cdn.shopify.com/s/files/1/0678/1009/9507/files/attach_anchorbolt_4-1024x633_7dccaf5a-9e77-4cbd-8052-e5d7c5cb7192_600x600.jpg?v=1672035333)
Step4
Finish up by placing the gravels to hide the anchor. Placing anchors will
reduce the splatter of the rainwater.