Attaching rain chain weight for hamon / migumo / migumo L / ajiro
Step1
Pass the U-shaped metal fitting through the bottom loop of the rain chain (or the bottom of the gutter body in the case of Hamon).
Step2
Insert the U-shaped metal fitting into one of the holes on the weight that is not in the center.
Step3
Tighten the screws from the back side of the weight.
Addition
Some water will scatter from the rain chain, so we recommend laying out crushed stones, among other material that may serve the purpose, on the ground in approximately 50cm diameter surrounding the rain chain to prevent mud and splashing.
