Attaching rain chain weight for hamon / migumo / migumo L / ajiro

Attaching Amane/Amane L /Amamichi/Shippo(weight)

Step1 

  Pass the U-shaped metal fitting through the bottom loop of the rain chain (or the bottom of the gutter body in the case of Hamon). 




 

Step2 

  Insert the U-shaped metal fitting into one of the holes on the weight that is not in the center. 

 


Step3

Tighten the screws from the back side of the weight. 


 Addition     
Some water will scatter from the rain chain, so we recommend laying out crushed stones, among other material that may serve the purpose, on the ground in approximately 50cm diameter surrounding the rain chain to prevent mud and splashing. 


Attaching Amakage/Amabachi (weight)

Step1 

Pass a wire catch through the center hole from beneath a metal weight holder.

Step2 

Place a weight over a metal weight holder.
Place a circular sleeve on a wire.

Step3

Pass a wire through a rain chain. Then put a wire through a circular sleeve once again.
① pull up a circular sleeve. ② Then tighten a hexagon socket head screw onto a circular sleeve with a hexagon wrench.

 

Step4

Cut the excessive wire.