Toh Rain Chain
This rain chain consists of straight cups in three different lengths. The spacing between the connected rain chains are unified with the spacing at which the water flow is most gracefully visible. Rhythmically connecting cups of different lengths, the simple yet refined shape enhances the flow of rainwater in an appealing manner. The lines connecting the rain chains and the cores that regulate the flow of water inside the Toh product line are all made of stainless steel, but the Toh line can be made with copper as well.
MaxDrainage: Liter/hour. 720
Attachments for upper part
Toh / Ta-ke / Toh L / Tama L(L size rain chains will include Large size of Gutter outlet and Large size of Bracket.)
Hamon / Migumo / Ajiro
Installing rain chain on a square gutter
Step1
Φ45mm hole (Φ60mm hole for L size rain chain) in a gutter for an outlet.
Step2
Pop in a gutter outlet and apply caulking as needed to seal a joint for leakage prevention.
Step3
After attaching a designated long bolt on the top of a rain chain, screw a hexagon nut onto a long bolt, then pull up through a stainless steel gutter outlet.
Step4
Put a long bolt through the center hole in a bracket, pull up, then screw a second
hexagon nut firmly.
Step5
Screw a wing nut tightly on top of a hexagon nut.
Notes
*There had been a case where a rain chain had fallen off, due to a rainstorm which caused a nut to become lose from hard swinging. Please take measures to lock a nut by bending a screw point or crushing a thread.
Addition
Installing rain chain on a round gutter
Step1
Cut about Φ25mm hole (Φ40mm for L size) in a round gutter. Fold the clipped edges down vertically.
Step2
After attaching a designated long bolt on the top of a rain chain, fasten a hexagon nut onto a long bolt, then pull up a long bolt through a gutter hole.
Step3
Put a long bolt through the center hole in a bracket and screw a second hexagon nut tightly.
Step4
Screw an additional wing nut tightly over a hexagon nut.
Uniquely designed joints
Aesthetically captivating water flow
Color variations
Support
About Delivery of Products
If we have your order in stock, we will complete the assembly of the rain chain and ship it within approximately 1 week from the date of your order. (Hamon types may take approximately 3 weeks.) The delivery time after shipment varies depending on the destination. Please check with the tracking number provided upon shipment. However, if the item is out of stock, it may take up to 3 to 4 months, so we encourage you to contact us promptly and as early as possible.
During shipping, customs in each country may need to confirm the package with the recipient (the customer). In such cases, the carrier or our company will contact you by phone or email. If we are unable to reach the recipient (the customer), the package may be discarded.If the package is returned to the sender (SEO Inc.) by customs or if it is discarded by customs, our company is unable to assume responsibility for the cost of re-delivery or the discarded products. Therefore, please pay close attention to calls and emails from the carrier or our company.
Customs Duty and Tariff
Customs duty is not included in our pricing. Upon purchasing our products, the customer is responsible for any customs duty in accordance to the laws of respective countries.
Return and ExchangePolicies
・In principle, we do not accept returns or exchanges after the arrival of the product. However, if the request for return or exchange of the product is due to defects, therefore our responsibility, then please contact us via the contact form within one week of the arrival. Please note that we cannot accept returns or exchanges passed that one-week period.
・In general, after receiving the returned product, we will refund the amount within one month after inspection.
・If the product is defective due to an accident during transportation, please contact us within one week of arrival. After you return the product, we will send you a replacement.
・As a general rule, the customer is responsible for the shipping costs when returning the product.
・Customers are responsible for contacting customs when processing the refund of import taxes paid upon receipt of the product.
・ If you have any questions about any of the information above, please contact us through the contact form.
Measuring Method
Please measure the height from the bottom of the eaves sprout to the setup surface on the ground.