Installing rain chain on a square gutter

Step1

Φ45mm hole (Φ60mm hole for L size rain chain) in a gutter for an outlet.

Step2

Pop in a gutter outlet and apply caulking as needed to seal a joint for leakage prevention.

Step3

After attaching a designated long bolt on the top of a rain chain, screw a hexagon nut onto a long bolt, then pull up through a stainless steel gutter outlet.

Step4

Put a long bolt through the center hole in a bracket, pull up, then screw a second
hexagon nut firmly.

Step5

Screw a wing nut tightly on top of a hexagon nut.

  Notes   

*There had been a case where a rain chain had fallen off, due to a rainstorm which caused a nut to become lose from hard swinging. Please take measures to lock a nut by bending a screw point or crushing a thread.     

Addition   

 

 

 

Installing rain chain on a round gutter

 

 

Step1

Cut about Φ25mm hole (Φ40mm for L size) in a round gutter. Fold the clipped edges down vertically.

 

Step2

After attaching a designated long bolt on the top of a rain chain, fasten a hexagon nut onto a long bolt, then pull up a long bolt through a gutter hole.

 

Step3

Put a long bolt through the center hole in a bracket and screw a second hexagon nut tightly.

Step4

Screw an additional wing nut tightly over a hexagon nut.